CLARE gap-type high-shear dispersing emulsifier in the structure have also gone through several updates, from the claw blade structure to structure, from one-way suction to two-way.
CLARE200 series claw structure, two-way suction-type high-shear dispersing emulsifier more inclined to apply to suspended solids or liquid material is slightly higher viscosity of the circumstances under which material is better, the specific basis of the actual process conditions CLARE application engineers’ll solve your problems. |
|
|
|
●Manual hydraulic pressure go up and down,removable hanging-up
●Removable hanging-up is made of hydrocylinder and hanging-up.
●The bottom equip four roller with polyamine,could move front-back,right-left freely.
●It will not happen severe rock while working.
●Cost efficient,easy to use ,good value. |
Manual hydraulic pressure go up and down |
|
|
●Motor driven go down and up hanging-up,good balance
●Equip contol cabinet for up and down,main engine,namely open and namely stop
●Equiped go and up overtravel-limit switch,all by control cabinet.
●The bottom equip four roller with polyamine,could move front-back,right-left freely
●It can change to manual hydraulic pressure go up and down or air dirve go up and down. |
removable hanging-up |
|
Model |
Power factor
(KW) |
Speed
(rpm) |
A |
B |
C |
D |
E |
F |
G |
Handle ability
(L) |
DE-201 |
1.5 |
2900 |
105 |
105 |
355 |
|
105 |
705 |
|
5~50 |
DE-202 |
2.2 |
2900 |
116 |
160 |
650 |
215 |
265 |
1155 |
8xφ16 |
50~100 |
DE-205 |
4 |
2900 |
141 |
195 |
725 |
255 |
290 |
1300 |
8xφ16 |
100~300 |
DE-210 |
7.5 |
2900 |
156 |
235 |
833 |
280 |
330 |
1520 |
8xφ16 |
200~800 |
DE-211 |
11 |
2918 |
184 |
235 |
833 |
280 |
330 |
1655 |
8xφ16 |
300~1000 |
DE-225 |
18.5 |
2900 |
200 |
280 |
1200 |
360 |
415 |
2065 |
8xφ20 |
500~1500 |
DE-230 |
22 |
1440 |
240 |
300 |
1200 |
360 |
415 |
2130 |
8xφ20 |
800~2000 |
DE-235 |
30 |
1440 |
260 |
320 |
1355 |
400 |
450 |
2525 |
8xφ20 |
1000~3000 |
DE-250 |
37 |
1440 |
280 |
340 |
1395 |
400 |
450 |
2585 |
8xφ20 |
1500~5000 |
DE-260 |
55 |
1447 |
330 |
380 |
1638 |
500 |
550 |
2995 |
8xφ20 |
2000~8000 |
DE-275 |
75 |
1440 |
350 |
400 |
1648 |
500 |
550 |
3050 |
12xφ20 |
3000~10000 |
Note:
Upper thruput in the table is tested by using water as medium
If there are high temperature,high pressure and explosive situations,must provide revalsant accurate parameters so as to customize. |
|
|
|