Work principle
By CLARE design and make the SLIM system change revolutionarily the way of charging to liquid. It uses a special high-speed rotation of the rotor of the vacuum suction. A tube from the funnel into the region and linking the work of the powder evenly inhalation into chamber and distribute it evenly in the fast-flowing stream fluid.The powder in the flow of fluid is completely wet instantly, no lumps reunion .Then the liquid and powder set by a high shear / rotor structures subjected to strong mechanical and hydraulic pressure to spread the polymer can exist in any block, and finally the fully wet and dispersed material, can produce of high-quality products.
Since the powder to be wet by flow liquid at the beginning, so the un-completely wet powder is nonexistence.And it will not form the crust on the surface of flow, mixing vessel wall axis and the wall of container.The traditional process is easy to form a hard crust, From this, we can see using the SLIM system will improved greatly the product quality.
SLIM system can work effectively in the vacuum and non-vacuum conditions. In the vacuum, the different pressure from inside and outside of container,will produce significant power to promote powder is inhaled.
SLIM system is a completely different treatment concepts. The equipment system incorporates all the necessary processing steps, all integrated in a machine, all processing is done instantly at the same time, solve some of the traditional equipment difficult to solve technical problems, marking a significant progress in modern technology.
Feedstock way: 1.pour from funnel 2. Automatic suction from the hose
|
